Parts (Electronics): Difference between revisions

From Adam Colton
Jump to navigation Jump to search
No edit summary
Line 197: Line 197:
| Capacitive Electret Microphone
| Capacitive Electret Microphone
| $1 / 10
| $1 / 10
| needs a driver
|-
| Ultrasonic module
| $1
|}
|}



Revision as of 21:29, 10 November 2015

IC

Part Name Cost Notes
555/556 Timer $2.15 / 50
LM741 Op Amp $1.20 / 10
LM317 Linear reg. $1.30 / 10
LM78xx Linear reg. $1.30 / 10 The xx is the voltage; 05,06,08,10,12,15,18,24

Microcontrollers

Name Cost I/O Flash Speed Peripherals Notes
ATTINY85 60¢ 6 8K 2pwm, 2-8 timer, 1adc 20MHz Small dev boards are available for around $1.75
ATMEGA8 90¢ 23 8K 16MHz 3pwm, 2adc, 2-8/1-16 timer Small dev boards are available for around $1.75

Packages

Name Description
DIP dual in-line pin, pins are 1/10" apart, 1/4" wide
QFP Quad Flat Pack

Modules

Name Cost Description
Voltage Meter $2.00 3x7seg LED, generally wide ranges of voltages
Buck Module $2.74 (4-40v) → (1.3-37v) @ 2A; includes led panel. Found a 9A version for $5, no display.
Bread Board Supply $1 Nice little package that plugs into a bread board and supplies either 3.3v or 5v. Takes 6.5v-12V through 5.5mm or USB
16x2 HD44780 LCD $2 Displays a wide range of characters, standard driver
ESP8622 $2 Wifi module
HC-06 $4 Bluetooth module

Semiconductors

Part Cost Limit Part
PNP BJT (TO-92) $1.43 / 100 40v 200mA 2N3906
NPN BJT (TO-92) $1.20 / 100 60v 200mA 2N3904
PNP BJT (TO-220) $2.60 / 50 100v 3A https://www.fairchildsemi.com/datasheets/TI/TIP32C.pdf TIP32]
NPN BJT (TO-220) $2.6 / 50 60v 3A TIP31
PNP BJT (TO-3) $4.87 / 5 60v 10A MJ2955
NPN BJT (TO-3) $2.60 / 5 60v 15A 2N3055
N-chan MOSFET (TO-92) $2.01 / 50 60v 200mA 2N7000
P-cha MOSFET (TO-92) $14 / 50 45v 230mA BS250 Note cost compared to N-chan
N-chan MOSFET (TO-220) $2.95 / 10 100v 9.7A IRF520N
P-cha MOSFET (TO-220) $2.38 / 10 100v 23A IRF9540
Diode $1.25 / 100 1000v 1A 1N4007

The TO-220 transistors are often sold in PNP/NPN pairs.

LEDs

Part Cost Notes
5mm Single Color $4 / 100 Some color packs available
3mm Single Color $1.5 / 100 Some color packs available
Tri-Color 5mm $5 / 100 Some color packs available
1W LED $8 / 50 Super bright, needs driver

Packages

Name Description
TO-92 Small black, semi circle, 3 leads from the bottom
TO-3 metal can, good for heat dissipation, cheap heat-sinks, shaped like a rounded diamond about 1"x1.5", leads are .43" apart
TO-220 metal tab heatsink
5mm Common LED package

TO stands for transistor-outline.

Sensors

Part Cost Notes
Temperature sensor $3 / 5 TO-92, -67F:257F
Photoresistor $1 / 20 TO-92, -67F:257F
Capacitive Electret Microphone $1 / 10 needs a driver
Ultrasonic module $1

Linear Components

Resistors

Resistors are typically 1/4W. The cost for these is negligible, assortment packages typically come in around 0.6¢ per resistor. To handle higher wattage, they can be used in parallel.

Capacitors

Electrolytic up to 220uF are very cheap (2.8¢) and available in assortment packs. Up to 2200uf is still pretty cheap, 7.5¢ with a 1000uF@10v cap coming in around 5.6¢. Beyond this, the goes up rapidly for either additional capacitance or voltage with a 2200uF@25v around 50¢.

Ceramics are cheap up to 100nf, also available in assortment packs (0.4¢).

Inductors

Small inductors are fairly cheap; assortment packs of 1/2w from 1uH to 4.7mH 5.5¢ a piece. They look like resistors.

Connectors

Description Cost Notes
Banana Plug $3.94 / 20
5.5x2.1mm DC socket $1.89 / 10
0.1" Headers Breakable Male 50x40-pin $8.75
0.1" Headers Female (not breakable) 10x40-pin $1.18
Swiss Machine Pin 12x40-pin $5.70 0.1" Headers Breakable Female
USB A PCB socket $4 / 10
3.5mm Socket $2 / 10
cable transition connector $4.90 / 25 Works with Ribbon cable, doesn't vary much regardless of pins

Cables

Name Wires Cost Notes
Cat5 4x twisted pairs $10 / 150' very long lengths are cheaper per ft ($50/1000')
1.27mm Pitch Ribbon Cable 4, 8, 10, 16, 26, 40 around $1/3' Uses special connectors

Ribbon cables have special connectors that convert the 1.27mm pitch cable into dual 2.54mm pitch sockets. A

Circuit Boards

Description Cost Source Cost
Copper Clad Board 36 x 4"x6" $22 2.5¢ insq
Ferric Chloride 4 oz dry / 1L wet $11
Perf Board 10 7x5cm $5.25 9.5¢ insq
Bread Board Standard Size $2.50
Shield Bread Board Sized for Arduino shields $2 / 5

Dev Boards

Name Cost Details
RasPi 2 B $39 900MHz, 1G ram, HDMI, micro sd
RasPi 2 B+ $30 700MHz, 512M ram, HDMI, micro sd
RasPi 2 A+ $25 700MHz, 256M ram, HDMI, micro sd