Hardware: Difference between revisions
Jump to navigation
Jump to search
Adamcolton (talk | contribs) |
Adamcolton (talk | contribs) |
||
| Line 56: | Line 56: | ||
** plugs | ** plugs | ||
** covers | ** covers | ||
* Hacksaw | |||
Large | Large | ||
Revision as of 18:02, 31 March 2019
- M15 pulley
- $1.80
- 3" caster wheel with lock
- $40 / 8 = $5.00 (ebay)
- $55 / 12 = $4.60 (ebay)
- 608ZZ bearing (8x22x7mm)
- $4 / 10
Hinges
| Type | Cost | Source | Notes |
|---|---|---|---|
| Piano | $8 : 30" $10 : 48" | Homedepot | |
| Medium 1.8" x 0.7" | $10 / 20 | Amazon |
Linear Bearings
Bearings
| Type | Cost |
|---|---|
| 8mm | $8 / 12 = $0.67 |
| 12mm | $7 / 10 = $0.70 |
Thomas Sanladerer recommends buying more bearings than needed for a project and using the best fits.
Rods
| Type | Cost |
|---|---|
| 8mm | $10.22 / 500mm = $0.02044 |
| 12mm | $14.87 / 500mm = $0.02968 |
To Buy
Mostly for shop organization project. Plan is to rent a truck.
Small
- Electrical
- wire
- boxes
- outlets
- plugs
- covers
- Hacksaw
Large
- conduit pipe for flip top
- 4" pipe for dust collection
- 1/2 sheets of plywood
- 2x 10 or 12
- diy t-track supplies
- 1/4 ply
- 3/8 threaded rod
Amazon
- sliding bolt for flip top
- nut, washer to lock together carts w/ threaded rod