VulcanCAD

Primitives

Units

Any primitive has a base unit associated with it (mm, in, feet).

Parameters

The hierarchy of values. I want to be able to do stock.ply.heavy.thickness.

There may need to be some division here. Stock parts, target measurements, derived measurements.

Sketch

Like FreeCAD.

Part

This is a solid. For organizational purposes, a part is also tagged as stock, machined or constructed. Stock means it's something we can buy - hinges, screws, boards. Machined is something that is created in a single step; 3D-printed, CNC milled, cast. Constructed parts are created by a construction process - sawing, drilling, gluing, lathing and probably a whole bunch more.

Assembly

A collection of parts with linkages between them.

Sweep

Single

Takes a single path and an initial vector and sweeps so the vector stays tangent to the motion

Double

Takes two paths and sweeps so that vector points from the first to the second and the scale is proportional to the starting vector

Triple

Takes three paths that return a full translation matrix, so one path is the origin, the second is X and the third is Y

In reality, there is only a 3-path sweep, but we can use 1 or 2 paths to derive the correct 3 path sweep.

Construction and Deconstruction

Part initialization:

• Extrusion of a sketch
• Rotation of a sketch
• Sweep a sketch
• Boolean combination of Parts
• Construction
• Deconstruction

Construction corresponds to the physical transformation of one part into another. This can be cutting a piece out, gluing two pieces together, or any other operation.

Deconstruction reverses construction operations but serves a more complex workflow. Deconstruction takes a part that was defined in one way and breaks it down differently. For instance, we could make a sphere from sheets of plywood. We create a sphere (rotation of sketch) then deconstruct it by taking slices. By deconstructing a fillet, we can map those slices to cylinders, and then place those cylinders on a board tracing the construction back to stock parts.

One thing I haven't figured out is back propagation. Say we're building a box that has 3 holes that need to line up, but they are placed relative to another piece in the final construction. Those holes should be drilled before the 3 pieces are joined to the construction or assembly.

Build Plan

One of the