Basement

From Adam Colton
Jump to navigation Jump to search

Project plan for the basement

  1. X Clean basement out
  2. X Tear everything out
  3. X Schedule mold removal & electrical
  4. Hang drywall
  5. Tape drywall
  6. paint drywall
  7. Build bar and cabinets
  8. install floors
  9. install baseboard and molding

I think I may build the bar/cabinets first so I don't put up a bunch of drywall I don't need.

I also think I want to put in the floor before the drywall so it can go under it a little. But I should put in and seal the bottom piece first.

Walls

https://www.youtube.com/watch?v=R9Mr0bCVOF0

I haven't been able to find a system like this, but I can cheat a little. The metal studs are available at HD. I'll just use a regular stud across the top and bottom. I can get metal tabs on EB pretty cheap. I'll put in 6 per stud. That should be plenty.

$0.297

Bar/Cabinets

I'll need to get exact measurements, but I want two taller cabinets at each end, a working space in the middle with shallow shelves. An open space underneath for a mini-fridge. The left-hand cabinet will hide the ugly pipe (but leave it accessible) and the right hand cabinet will hold the electronics as well as having a space for a laundry basket under the chute.

Update

Cashway for lumber

https://www.woodmagazine.com/make-cabinets-the-easy-way

It's 2' deep, 7' tall, but I'll need to go a bit lower for the vent.

TV

Not much, but I'd like to repaint the chimney, put up shelves for the speakers and put up something to hold the cabling.

It may be worth putting up a facade of brick or stone.

Floor

There was a lot of moisture under the floor. I really need to get the gutter situation fixed.

I could put in a dimpled subfloor like this. I'll need 4 rolls.

Update

We painted the floor with an epoxy paint, but it's not very durable. I think I'll finish the rest of the basement as is, but when it's done, I'll go back and put in a linoleum floor. Even if some moisture is trapped, it can't mold.

Measurements

Ground 13' x 22'

Dry wall: (13+22)*7*2 = 490 sqft

Floor: 13*22 = 286

Bar area: 8'6"W x 7'T x 2'D

Pipe is about 20" wide, 55" high.

Chute is about 15" wide

Buy

https://docs.google.com/spreadsheets/d/1ZqGCZwrHoOPK3T4fSJMv9sb0Ld_IenyOJS0GakDXFJM/edit#gid=0